click on thumbnail for larger view

Available Colors

- 10% Open

- 7% Open

- 5% Open

Color Disclaimer

Fabric

• Fabric is cut with an ultra-sonic cutter to seal the fabric edges
• Fabric will not be center in the brackets with a wider gap on the clutch side of shade

Fabric NOT rotated

• Minimum Width: 6" ordered width
• Maximum Width: 96" ordered width
• Minimum Height: 10"
• Maximum Height: 192"

Series 5000 Fabric is not made to be rotated

Inside Mount deductions

• Shade is made for brackets to be mounted inside window with a top window width equal to the size ordered
• Fabric deductions vary based on size of shade and clutch from 7/8" to 1-3/8
• Fabric and tube are same width

Outside Mount deductions

• none

Clutch

• RollEase continuous cord loop clutch
• Sized as needed for each individual shade lifting requirement

Roller Tube

• Metal tube in varying sizes (1" to 2.5") based on individual shade width and length
• Fabric is attached with tape to roller
• Shades wider than 108" may have minor deflection in center

Brackets

• Universal brackets (for inside, outside or ceiling mounting) for standard shades are available in white or black
• Fascia brackets match the fascia color ordered

Cord Loop

• Available as stainless steel bead chain or nylon beaded cord
• Nylon beaded cord loop is suggested on larger shades
• If an external hembar and/or fascia are ordered, cord loop will color coordinate hembar/fascia color

Galaxy Clutch

• Nylon cord loop only
• No bead connectors or stops can be applied to chain because of extra rotations required to lift and lower shades

Fascia

• Extruded aluminum panel that hides the clutch and the tube
• Standard Fascia is 4" tall
• Available in several colors
• Hardware and external hembar (if ordered) will match the fascia color
• Fascia brackets include end caps

Fabric Wrapped Fascia

• Fabric can be applied to the 4" fascia to provide a matching, finished look
• Fabric is attached with a solid piece of double sided tape to front and bottom side of fascia

Hembar

• Metal hembar sewn into bottom of fabric is standard
• External hembar available upon request at no charge with baked enamel finish that matches most commercial window frames: Anondized Aluminum, White, Vanilla, Bronze and Black
• Hardware and external hembar will match fascia color unless otherwise specified

Cassette System

• Maximum width: 120”
• Maximum height: 120”
• Available in several colors

Reverse Roll