Solar Shades - Phifer SheerWeave Style 2390/2360/2410/2500

click on thumbnail for larger view

Available Colors

P12 Oyster

P13 Oyster/Beige

P14 Oyster/Pearl Gray

Q20 Beige

Q21 Beige/Pearl Gray

V20 Pearl Gray

V21 Charcoal

V22-Charcoal/ Gray

V24 Charcoal/ Chestnut

Color Disclaimer

Fabric

• Fabric is cut with an ultra-sonic cutter to seal the fabric edges
• Fabric will not be center in the brackets with a wider gap on the clutch side of shade

Fabric NOT rotated

• Minimum Width: 6" ordered width
• Maximum Width: 96" ordered width
• Minimum Height: 10"
• Maximum Height: 192"

Fabric rotated as required

• Minimum Width: 6" ordered width
• Maximum Width: 168" ordered width
• Minimum Height: 10"
• Maximum Height: 192"
• Fabric will be rotated (turned 90° to run horizontal instead of vertical) when shade is wider than fabric width available (see Maximum Width in "Size Restrictions for Fabric NOT Rotated"). Horizontal seams will be added at our discretion with the seam placed as high as possible (from the bottom of the shade up) unless otherwise specified. Regular and rotated fabrics may differ in appearance and may not be desirable in the same area.
• Seams generally occur when the length is longer than the maximum width (see Maximum Width in "Size Restrictions for Fabric NOT Rotated") of the fabric less 12"

Inside Mount deductions

• Shade is made for brackets to be mounted inside window with a top window width equal to the size ordered
• Fabric deductions vary based on size of shade and clutch from 7/8" to 1-3/8
• Fabric and tube are same width

Outside Mount deductions

• none

Clutch

• RollEase continuous cord loop clutch
• Sized as needed for each individual shade lifting requirement

Roller Tube

• Metal tube in varying sizes (1" to 2.5") based on individual shade width and length
• Fabric is attached with tape to roller
• Shades wider than 108" may have minor deflection in center

Brackets

• Universal brackets (for inside, outside or ceiling mounting) for standard shades are available in white or black
• Fascia brackets match the fascia color ordered

Cord Loop

• Available as stainless steel bead chain or nylon beaded cord
• Nylon beaded cord loop is suggested on larger shades
• If an external hembar and/or fascia are ordered, cord loop will color coordinate hembar/fascia color

Galaxy Clutch

• Nylon cord loop only
• No bead connectors or stops can be applied to chain because of extra rotations required to lift and lower shades

Fascia

• Extruded aluminum panel that hides the clutch and the tube
• Standard Fascia is 4" tall
• Available in several colors
• Hardware and external hembar (if ordered) will match the fascia color
• Fascia brackets include end caps

Fabric Wrapped Fascia

• Fabric can be applied to the 4" fascia to provide a matching, finished look
• Fabric is attached with a solid piece of double sided tape to front and bottom side of fascia

Hembar

• Metal hembar sewn into bottom of fabric is standard
• External hembar available upon request at no charge with baked enamel finish that matches most commercial window frames: Anondized Aluminum, White, Vanilla, Bronze and Black
• Hardware and external hembar will match fascia color unless otherwise specified

Cassette System

• Maximum width: 120”
• Maximum height: 120”
• Available in several colors

Reverse Roll