2 1/2" - Wood Shutter Blind - Normal Construction

1-800-847-5208 / local 301-847-7000

click on thumbnail for larger view

Available Colors

#100
Bright White

#101
Pure White

#102
Bone

#103
Antique White

#108
Light Oak

#109
Sugar Maple

#110
Golden Oak

#111
Pecan

#117
Mahogany

Color Disclaimer

Factory Specifications

• Minimum Width: 9-1/2" (after factory deductions)
• Maximum Width (single blind): 96"
• Minimum Height: 10"
• Maximum Height: 120"
• Headrail Size: 2" X 2-1/4"
• Minimum mounting Space: 1-1/8"
• Flush Mounting Space: 3"
• Outside mount flat space: 2-1/4"
• Valance returns: 2-7/8"

Factory deductions

Inside Mount

• Headrail: 1/2"
• Slats: 1/2"
• Valance: 1/8"

Outside Mount

• Headrail: none
• Slats: none
• Valance: add 1-1/2"

Hold down brackets

Brackets to hold bottom rail stationary. Comonly used on door mounted blinds.

Spacer blocks

Placed between mounting brackets and mounting surface, spacer blocks add 1/4" between the blind and the mounting surface. Most commonly used on door mounted blinds.

2 on 1 headrail

A 2-on-1 split blind is two separately functioning blinds mounted on the same headrail with a one-piece valance.2-on-1 splits are sometimes necessary on large widths because the product can become stressed and possibly begin to warp over time. The lift mechanism can be over stressed as well on large blinds due to the weight of the materials when lifted.In other cases a split blind may be optimal for the installation. If you have a mullion, or divider in the window and wish to divide the window into two halves that can be operated separately a split blind would be the solution.

3 on 1 headrail

A 3-on-1 split blind is three separately functioning blinds mounted on the same headrail with a one-piece valance. 2 or 3-on-1 splits are sometimes necessary on large widths because the product can become stressed and possibly begin to warp over time. The lift mechanism can be over stressed as well on large blinds due to the weight of the materials when lifted. In other cases a split blind may be optimal for the installation. If you have mullions, or dividers in the window and wish to divide the window into separate parts that can be operated separately a split blind would be the solution.

motorized tilter kit

Control hard-to-reach windows and rooms filled with windows at the touch of a button. The motor is concealed in the headrail and the battery holder may be placed inside the headrail or may be positioned up to 59" away from the receiver.

remote control

remote control for motorized tilt

Tile Cutout

A tile cut-out is used to fit a blind where a portion of the window opening narrows. Typically, this is due to a tiled back splash.