1/2" Single Cell Fabric - Available colors

1-800-847-5208 / local 301-847-7000

Available Colors

#1001
White Lace

#1002
Shell White

#1003
Creamy White

#1004
Alabaster

#1005
Beige

#1006
Cottonwood

#1007
Taupe

#1008
Rattan

#1009
Brandy

#1010
Bouquet

#1011
Cabernet

#1012
Green Moss

#1013
Olive

#1014
Sky Blue

#1015
Navy

#1016
Deep Grey

Color Disclaimer

Factory Specifications

• Minimum Width: 12" (after factory deductions)
• Maximum Width (single shade): 96"
• Minimum Height: 10"
• Maximum Height: 144"
• Headrail Size: Aluminum - color coordinated to fabric colors
• Minimum mounting Space: 1-3/4"
• Outside mount flat space: 3/4"
• endcaps add approximately: 1/8"
• Fabric: Durable, dust resistant, non-woven polyester. Duotone-pure white to outside.
• Cord Lock: Patented, non-rusting, fully submersible polycarbonate plastic.
• Mounting hardware: Hidden top-mount brackets w/ screws. Specialty brackets included upon request.

Factory deductions

Inside Mount

• Headrail: 3/8"
• Fabric: 3/8"

Outside Mount

• Headrail: none
• Fabric: none

Hold down brackets

Brackets to hold bottom rail stationary. Comonly used on door mounted blinds.

Spacer blocks

Placed between mounting brackets and mounting surface, spacer blocks add 1/4" between the blind and the mounting surface. Most commonly used on door mounted blinds.

Top Down / Bottom Up

The top down - bottom up option allows you to raise the shade up or lower the top of the shade down. The top down - bottom up feature consists of two controls: a top down control on the left and a bottom up control on the right.

EasyLift

The shade is raised or lowered by operating the control cord. Pulling on either side of the cord releases the clutch and adjusts the shades’s height by wrapping the lift cords onto the spool. When the control cord is released the clutch then holds the shade in its new position. This system is completely concealed inside a 2" x 1-13/16" headrail. Headrail color may vary from shades constructed with the standard lift system.

Extension Brackets

Placed between mounting brackets and mounting surface, extension brackets provide an adjustable space from 1/4" to 2" between the blind and the mounting surface. Most commonly used on door mounted shades.

2 shades spliced into one headrail

A 2-on-1 spliced headrail is two separately functioning shades with a spliced headrail joined by a small metal splicer. 2-on-1 splices are sometimes necessary on large widths because the product cannot be manufactured as a single shade. In other cases a spliced headrail may be optimal for the installation. If you have a mullion, or divider in the window and wish to divide the window into two halves that can be operated separately a spliced headrail would be the solution. Spliced headrail configurations require split controls with the left control on the left shade and the right control on the right shade.

Side mount brackets

Side mount brackets offer an alternative mounting option by allowing you to mount the shade from each end of the headrail. This type of mounting is necessary in arched windows when it would be impossible to mount the shade from the top.

Cordless

Cordless shades are designed to keep your children and pets safe by completely eliminating cords from window shade operation, thereby removing the risk of strangulation. Chordless shades also provide a clear view out your windows, without the distraction of pooling cords. Cannot be combined with EasyLift, Top Down / Bottom up or 2-on-1 headrail configurations.

Perfect Arch

Perfect arches are those where the radius of the circle is constant at all points (half of a circle). Perfect arches do not require a template. Minimum Width - 6". Maximum Width - 84". Arch is fixed and will not move.